Start by pressing your 6 12rectangle in half lengthwise. It should now be 3 12./p>
Next, use a bowl to make rounded edges on the highest of the clutch-the 22part. Don do it on the bottom but. The underside will likely be folded up to make the pockets, and you don want these corners rounded off. In case you accidentally do that (like I did just go along with it and attempt to make it look like it was intentional!
Open up your folded piece of fabric after you’e rounded off the top corners. Lay your batting on the unsuitable aspect of the fabric and easy it out. Convey the top of the changing pad over the batting. *observe that the pockets won have batting in them, so your batting shall be considerably smaller than the fabric. Mkay. Moving on.
Get a ruler and a fabric marker and mark where you’e going to quilt the changing pad. Use security pins to hold your entire layers of fabric and batting collectively. Do not sew over security pins. It is dangerous, and it is unattainable to get them out once you’e sewn over them. Do I do know this from experience?! Ermf course not!! 😉 Look carefully and you l see that I’e safely safety pinned the layers in the middle of the squares.
Quilt your changing pad on the sewing machine. As soon as you’e quilted your altering pad, trim off the excess batting.
Sew some bias tape alongside the underside of the altering pad. Fold it up to where the batting ends. Sew along the edges and down the middle. Now you’e acquired two pockets for holding diapers, wipes, and no matter else you want for profitable diaper adjustments. Presumably a face mask? A straight jacket to maintain your wiggly child nonetheless?
Now it time to spherical off the bottom corners.
Baste the bias tape along all the skin edges. It will give the altering pad a smooth binding. Then sew it down with your sewing machine. Get loopy with decorative stitches. It will be enjoyable! As soon as that’s sewn, take away your hand stitching. Don look at my rounded pocket in the following image.
You looked at it, didn you?! Now take your strap and sew the bias tape around that too. It ought to appear to be this:
Now it time to add the Velcro to the strap.
Sew a giant button to the top of the opposite aspect.
Now take some bias tape and sew it right into a strip. This would be the loop that the Velcro strip wraps around to maintain the clutch closed.
Sew the Velcro strap and the bias tape loop on both sides of the top of the changing pad-the 22facet without pockets.
Now you’e prepared to make use of your altering pad clutch! Stuff the pockets with all your diapering necessities and lay your baby on the altering pad. Change baby diaper. Repeat as often as needed.
Need help folding the changing pad clutch? First, remove the baby. The clutch Is not going to fold correctly with the baby inside. 😉
Now you’ve a cute diaper clutch that can also be a altering pad. This will make diapering in public locations a bit simpler. One other perk of this cute altering pad clutch? It one hundred% washable! It tremendous delicate. It far more comfortable than the vinyl wipe-in a position changing pads you’ll be able to should purchase. They also make nice child gifts!
P.S. Don neglect to depart a comment!